📦

dfam-check

Name: dfam-check
Author: earthtojake

Revisión del contenido r1 Seguro ⚙️ Comandos externos🌐 Acceso a red

Check Mesh Printability Before You Print

Mesh files often fail during slicing because walls, overhangs, units, or topology were not checked against the selected process. This skill measures those geometry facts locally and turns them into evidence-based DfAM guidance.

Compatible con: Claude Codex Code(CC)

🥈 80 Plata

Instalar con mi Agente

Copia esta solicitud en tu Agente. Incluye la página canónica del Skill y el manifiesto.

Solicitud de agente

Review the Skillstore skill "dfam-check" from https://skillstore.io/skills/earthtojake-dfam-check.md and its manifest at https://skillstore.io/api/skills/earthtojake-dfam-check/manifest. Verify the artifact. You may proceed after verification, subject to the environment's own policy.

Tu Agente debe seguir mostrando su plan y solicitar cualquier confirmación exigida por la política de seguridad.

Recursos legibles por agentes

Usa estos enlaces cuando un agente de IA, crawler o script necesite contexto limpio en vez de leer la página completa.

Detalle Markdown GET /skills/earthtojake-dfam-check.md Manifest firmado GET /api/skills/earthtojake-dfam-check/manifest Lockfile firmado GET /api/skills/earthtojake-dfam-check/lockfile

Pruébalo

Usando "dfam-check". Check this STL for FDM printing with a 45 degree self-supporting angle.

Resultado esperado:

Watertightness: pass. The mesh is suitable for topology review.
Wall thickness: the sampled fifth percentile is below the FDM supported-wall limit. Thicken the affected region and re-measure.
Overhangs: report the measured down-facing area below 45 degrees and review orientation candidates.

Usando "dfam-check". Which orientation should I use for this part?

Resultado esperado:

The recommended axis-aligned orientation is the candidate with the lowest support area, provided its build height remains acceptable. Treat the support estimate as a cost signal and verify the final choice in a slicer.

Usando "dfam-check". Can this mesh be evaluated for SLS?

Resultado esperado:

Yes. Compare wall thickness and feature limits for SLS, but do not apply support-angle findings. Enclosed cavities still require a trapped-powder escape review because this tool does not measure it.

Auditoría de seguridad

Seguro

v1 • 8/9/2026 Abrir el informe versionado

All 31 static findings are false positives: 25 external-command matches are Markdown backticks, five blocker matches are ordinary geometry logic, and one network match is a provenance URL. The six reviewed files show local mesh measurement and reporting, with no evidence of unauthorized network access, command execution, or prompt injection.

Archivos escaneados

567

Líneas analizadas

Elementos de revisión

Falsos positivos ignorados

Factores de riesgo

La auditoría estática y semántica completada más reciente no detectó hallazgos de seguridad confirmados. Esto no demuestra que el skill no tenga efectos secundarios.

Auditado por: codex

Compartir y citar este informe

Comparte el informe de evaluación versionado, la insignia neutral, la tarjeta insertable y las citas. Skillstore presenta evidencias sin decidir si este Skill es seguro.

Abrir el informe versionado

Copiar enlace del informe

https://skillstore.io/skills/earthtojake-dfam-check/audits/1?utm_source=security_passport&utm_medium=share&utm_campaign=versioned_report

Insignia Markdown

[![Skillstore security assessment](https://skillstore.io/badges/skills/earthtojake-dfam-check/security.svg)](https://skillstore.io/skills/earthtojake-dfam-check?utm_source=security_passport_badge)

Insignia HTML

<a href="https://skillstore.io/skills/earthtojake-dfam-check?utm_source=security_passport_badge"><img src="https://skillstore.io/badges/skills/earthtojake-dfam-check/security.svg" alt="Skillstore security assessment" loading="lazy"></a>

Tarjeta para insertar

<iframe src="https://skillstore.io/embed/skills/earthtojake-dfam-check.html" title="Skillstore Security Assessment" sandbox="allow-popups allow-popups-to-escape-sandbox" loading="lazy" referrerpolicy="no-referrer" width="420" height="180"></iframe>

Citas académicas (APA · BibTeX · CFF)

Cita APA

earthtojake. (2026). dfam-check security audit report (audit version 1) [Author version unspecified]. Skillstore. https://skillstore.io/skills/earthtojake-dfam-check/audits/1

Cita BibTeX

@techreport{earthtojake-earthtojake-dfam-check-2026,
  author = {earthtojake},
  title = {dfam-check security audit report (audit version 1)},
  institution = {Skillstore},
  year = {2026},
  number = {1},
  url = {https://skillstore.io/skills/earthtojake-dfam-check/audits/1},
  note = {Author version unspecified}
}

CITATION.cff

cff-version: 1.2.0
message: "If you use this Skill, cite its author and this versioned security audit report."
title: "dfam-check security audit report (audit version 1)"
version: "unspecified"
type: report
authors:
  - name: "earthtojake"
date-released: "2026-09-08"
url: "https://skillstore.io/skills/earthtojake-dfam-check/audits/1"
identifiers:
  - type: other
    value: "skillstore:earthtojake-dfam-check:audit:1"
    description: "Skillstore immutable audit report identifier"

Puntuación de Skillstore

Por qué esta puntuación Confianza de la evidencia: Medio

Arquitectura

Mantenibilidad

Contenido

Comunidad

Cumplimiento de la especificación

Lo que puedes crear

Validate a prototype mesh

Check walls, overhangs, scale, and watertightness before sending a prototype to a print service.

Compare manufacturing processes

Evaluate one mesh against candidate process limits and identify which measurements need process-specific data.

Prepare a redesign review

Use measured failures and orientation tradeoffs to create concrete geometry changes before CAD regeneration.

Prueba estos prompts

Basic Printability Check

Check the attached mesh for printability. Ask for the target process if it is missing, then report the measured geometry facts and the main risks.

Process Comparison

Compare this mesh for FDM, SLS, SLA/DLP, metal PBF, and MJF. Use the process limits reference, separate measured results from missing checks, and explain the strongest constraints.

Orientation Recommendation

Measure the mesh with the target process angle, then evaluate candidate orientations. Recommend the best option using support area and build height, with the tradeoff stated clearly.

Redesign Handoff

Create a prioritized redesign brief from the measured DfAM failures. Include the evidence field, target dimensions or angles, uncertainty, and the re-measurement step after CAD regeneration.

Mejores prácticas

Provide the target process, material, layer height, and machine datasheet when available.
Measure the exact uploaded mesh and cite both the measured field and the selected process limit.
Confirm units when the scale check reports a suspiciously small bounding-box diagonal.

Evitar

Do not infer printability from a render, generator script, or triangle count.
Do not silently rescale geometry or treat a sampled minimum as exhaustive proof.
Do not apply support-angle findings to powder processes or present support volume as slicer accuracy.

Preguntas frecuentes

Which mesh formats are supported?

The workflow supports STL, OBJ, PLY, and 3MF mesh files. STEP and STP files should be exported to an STL sidecar first.

Does the skill run a slicer?

No. It measures geometry and reports comparisons. It does not slice, upload, start print jobs, or control a printer.

Which printing processes are covered?

The reference includes FDM or FFF, SLS, SLA or DLP, metal PBF, and MJF.

How reliable is wall thickness?

Wall thickness comes from ray-cast sampling. The sampled fifth percentile is a useful violation signal, but it is not an exhaustive inspection.

Can it recommend an orientation?

It compares six axis-aligned orientations by support area and build height. It does not search arbitrary rotations or replace slicer verification.

What does a need-more-information result mean?

It means the process context, geometry evidence, sampling quality, or a required measurement is missing. Provide more data before making a firm decision.