📦

dfam-check

Name: dfam-check
Author: earthtojake

Inhaltsrevision r1 Sicher ⚙️ Externe Befehle🌐 Netzwerkzugriff

Check Mesh Printability Before You Print

Mesh files often fail during slicing because walls, overhangs, units, or topology were not checked against the selected process. This skill measures those geometry facts locally and turns them into evidence-based DfAM guidance.

Unterstützt: Claude Codex Code(CC)

🥈 80 Silber

Mit meinem Agent installieren

Kopieren Sie diese Anfrage in Ihren Agent. Sie enthält die maßgebliche Skill-Seite und das Manifest.

Agent-Anfrage

Review the Skillstore skill "dfam-check" from https://skillstore.io/skills/earthtojake-dfam-check.md and its manifest at https://skillstore.io/api/skills/earthtojake-dfam-check/manifest. Verify the artifact. You may proceed after verification, subject to the environment's own policy.

Ihr Agent sollte weiterhin seinen Plan anzeigen und alle von der Sicherheitsrichtlinie verlangten Bestätigungen anfordern.

Agent-lesbare Ressourcen

Verwenden Sie diese Links, wenn ein KI-Agent, Crawler oder Skript sauberen Kontext benötigt, statt die vollständige Seite zu lesen.

Markdown-Detailseite GET /skills/earthtojake-dfam-check.md Signiertes manifest GET /api/skills/earthtojake-dfam-check/manifest Signiertes lockfile GET /api/skills/earthtojake-dfam-check/lockfile

Testen

„dfam-check“ wird verwendet. Check this STL for FDM printing with a 45 degree self-supporting angle.

Erwartetes Ergebnis:

Watertightness: pass. The mesh is suitable for topology review.
Wall thickness: the sampled fifth percentile is below the FDM supported-wall limit. Thicken the affected region and re-measure.
Overhangs: report the measured down-facing area below 45 degrees and review orientation candidates.

„dfam-check“ wird verwendet. Which orientation should I use for this part?

Erwartetes Ergebnis:

The recommended axis-aligned orientation is the candidate with the lowest support area, provided its build height remains acceptable. Treat the support estimate as a cost signal and verify the final choice in a slicer.

„dfam-check“ wird verwendet. Can this mesh be evaluated for SLS?

Erwartetes Ergebnis:

Yes. Compare wall thickness and feature limits for SLS, but do not apply support-angle findings. Enclosed cavities still require a trapped-powder escape review because this tool does not measure it.

Sicherheitsaudit

Sicher

v1 • 8.9.2026 Versionsbericht öffnen

All 31 static findings are false positives: 25 external-command matches are Markdown backticks, five blocker matches are ordinary geometry logic, and one network match is a provenance URL. The six reviewed files show local mesh measurement and reporting, with no evidence of unauthorized network access, command execution, or prompt injection.

Gescannte Dateien

567

Analysierte Zeilen

Prüfelemente

Falschmeldungen ignoriert

Risikofaktoren

Das letzte abgeschlossene statische und semantische Audit erkannte keine bestätigten Sicherheitsbefunde. Dies beweist nicht, dass der Skill keine Nebenwirkungen hat.

Geprüft von: codex

Diesen Bericht teilen & zitieren

Teile den versionierten Bewertungsbericht, das neutrale Badge, die Einbettungskarte und Zitate. Skillstore berichtet Nachweise, ohne zu entscheiden, ob dieser Skill sicher ist.

Versionsbericht öffnen

Berichtslink kopieren

https://skillstore.io/skills/earthtojake-dfam-check/audits/1?utm_source=security_passport&utm_medium=share&utm_campaign=versioned_report

Markdown-Badge

[![Skillstore security assessment](https://skillstore.io/badges/skills/earthtojake-dfam-check/security.svg)](https://skillstore.io/skills/earthtojake-dfam-check?utm_source=security_passport_badge)

HTML-Badge

<a href="https://skillstore.io/skills/earthtojake-dfam-check?utm_source=security_passport_badge"><img src="https://skillstore.io/badges/skills/earthtojake-dfam-check/security.svg" alt="Skillstore security assessment" loading="lazy"></a>

Einbettungskarte

<iframe src="https://skillstore.io/embed/skills/earthtojake-dfam-check.html" title="Skillstore Security Assessment" sandbox="allow-popups allow-popups-to-escape-sandbox" loading="lazy" referrerpolicy="no-referrer" width="420" height="180"></iframe>

Wissenschaftliche Zitate (APA · BibTeX · CFF)

APA-Zitat

earthtojake. (2026). dfam-check security audit report (audit version 1) [Author version unspecified]. Skillstore. https://skillstore.io/skills/earthtojake-dfam-check/audits/1

BibTeX-Zitat

@techreport{earthtojake-earthtojake-dfam-check-2026,
  author = {earthtojake},
  title = {dfam-check security audit report (audit version 1)},
  institution = {Skillstore},
  year = {2026},
  number = {1},
  url = {https://skillstore.io/skills/earthtojake-dfam-check/audits/1},
  note = {Author version unspecified}
}

CITATION.cff

cff-version: 1.2.0
message: "If you use this Skill, cite its author and this versioned security audit report."
title: "dfam-check security audit report (audit version 1)"
version: "unspecified"
type: report
authors:
  - name: "earthtojake"
date-released: "2026-09-08"
url: "https://skillstore.io/skills/earthtojake-dfam-check/audits/1"
identifiers:
  - type: other
    value: "skillstore:earthtojake-dfam-check:audit:1"
    description: "Skillstore immutable audit report identifier"

Skillstore-Score

Warum dieser Score Evidenzvertrauen: Mittel

Architektur

Wartbarkeit

Inhalt

Gemeinschaft

Spezifikationskonformität

Was Sie erstellen können

Validate a prototype mesh

Check walls, overhangs, scale, and watertightness before sending a prototype to a print service.

Compare manufacturing processes

Evaluate one mesh against candidate process limits and identify which measurements need process-specific data.

Prepare a redesign review

Use measured failures and orientation tradeoffs to create concrete geometry changes before CAD regeneration.

Diese Prompts ausprobieren

Basic Printability Check

Check the attached mesh for printability. Ask for the target process if it is missing, then report the measured geometry facts and the main risks.

Process Comparison

Compare this mesh for FDM, SLS, SLA/DLP, metal PBF, and MJF. Use the process limits reference, separate measured results from missing checks, and explain the strongest constraints.

Orientation Recommendation

Measure the mesh with the target process angle, then evaluate candidate orientations. Recommend the best option using support area and build height, with the tradeoff stated clearly.

Redesign Handoff

Create a prioritized redesign brief from the measured DfAM failures. Include the evidence field, target dimensions or angles, uncertainty, and the re-measurement step after CAD regeneration.

Bewährte Praktiken

Provide the target process, material, layer height, and machine datasheet when available.
Measure the exact uploaded mesh and cite both the measured field and the selected process limit.
Confirm units when the scale check reports a suspiciously small bounding-box diagonal.

Vermeiden

Do not infer printability from a render, generator script, or triangle count.
Do not silently rescale geometry or treat a sampled minimum as exhaustive proof.
Do not apply support-angle findings to powder processes or present support volume as slicer accuracy.

Häufig gestellte Fragen

Which mesh formats are supported?

The workflow supports STL, OBJ, PLY, and 3MF mesh files. STEP and STP files should be exported to an STL sidecar first.

Does the skill run a slicer?

No. It measures geometry and reports comparisons. It does not slice, upload, start print jobs, or control a printer.

Which printing processes are covered?

The reference includes FDM or FFF, SLS, SLA or DLP, metal PBF, and MJF.

How reliable is wall thickness?

Wall thickness comes from ray-cast sampling. The sampled fifth percentile is a useful violation signal, but it is not an exhaustive inspection.

Can it recommend an orientation?

It compares six axis-aligned orientations by support area and build height. It does not search arbitrary rotations or replace slicer verification.

What does a need-more-information result mean?

It means the process context, geometry evidence, sampling quality, or a required measurement is missing. Provide more data before making a firm decision.