📦

dfam-check

Name: dfam-check
Author: earthtojake

مراجعة المحتوى r1 آمن ⚙️ الأوامر الخارجية🌐 الوصول إلى الشبكة

Check Mesh Printability Before You Print

Mesh files often fail during slicing because walls, overhangs, units, or topology were not checked against the selected process. This skill measures those geometry facts locally and turns them into evidence-based DfAM guidance.

يدعم: Claude Codex Code(CC)

🥈 80 فضي

التثبيت باستخدام Agent لدي

انسخ هذا الطلب إلى Agent لديك. يتضمن صفحة Skill المعتمدة وملف manifest.

طلب الوكيل

Review the Skillstore skill "dfam-check" from https://skillstore.io/skills/earthtojake-dfam-check.md and its manifest at https://skillstore.io/api/skills/earthtojake-dfam-check/manifest. Verify the artifact. You may proceed after verification, subject to the environment's own policy.

يجب أن يواصل Agent عرض خطته وطلب أي تأكيد تفرضه سياسة الأمان.

موارد مهيّأة لـ Agents

استخدم هذه الروابط عندما يحتاج AI Agent أو crawler أو script إلى سياق نظيف بدلًا من قراءة الصفحة كاملة.

تفاصيل Markdown GET /skills/earthtojake-dfam-check.md manifest موقَّع GET /api/skills/earthtojake-dfam-check/manifest lockfile موقَّع GET /api/skills/earthtojake-dfam-check/lockfile

اختبرها

جارٍ استخدام "dfam-check". Check this STL for FDM printing with a 45 degree self-supporting angle.

النتيجة المتوقعة:

Watertightness: pass. The mesh is suitable for topology review.
Wall thickness: the sampled fifth percentile is below the FDM supported-wall limit. Thicken the affected region and re-measure.
Overhangs: report the measured down-facing area below 45 degrees and review orientation candidates.

جارٍ استخدام "dfam-check". Which orientation should I use for this part?

النتيجة المتوقعة:

The recommended axis-aligned orientation is the candidate with the lowest support area, provided its build height remains acceptable. Treat the support estimate as a cost signal and verify the final choice in a slicer.

جارٍ استخدام "dfam-check". Can this mesh be evaluated for SLS?

النتيجة المتوقعة:

Yes. Compare wall thickness and feature limits for SLS, but do not apply support-angle findings. Enclosed cavities still require a trapped-powder escape review because this tool does not measure it.

التدقيق الأمني

آمن

v1 • ٨‏/٩‏/٢٠٢٦ فتح التقرير المرتبط بالإصدار

All 31 static findings are false positives: 25 external-command matches are Markdown backticks, five blocker matches are ordinary geometry logic, and one network match is a provenance URL. The six reviewed files show local mesh measurement and reporting, with no evidence of unauthorized network access, command execution, or prompt injection.

الملفات التي تم فحصها

567

الأسطر التي تم تحليلها

عناصر المراجعة

تم تجاهل الإيجابيات الكاذبة

عوامل الخطر

⚙️ الأوامر الخارجية (25)

🌐 الوصول إلى الشبكة (1)

SKILL.md:8

لم يكتشف أحدث تدقيق ثابت ودلالي مكتمل أي نتائج أمنية مؤكدة. ولا يثبت ذلك أن المهارة خالية من الآثار الجانبية.

دقّقه: codex

شارك واستشهد بهذا التقرير

شارك تقرير التقييم المرتبط بالإصدار والشارة المحايدة وبطاقة التضمين والاستشهادات. تعرض Skillstore الأدلة من دون أن تقرر ما إذا كانت هذه المهارة آمنة.

فتح التقرير المرتبط بالإصدار

نسخ رابط التقرير

https://skillstore.io/skills/earthtojake-dfam-check/audits/1?utm_source=security_passport&utm_medium=share&utm_campaign=versioned_report

شارة Markdown

[![Skillstore security assessment](https://skillstore.io/badges/skills/earthtojake-dfam-check/security.svg)](https://skillstore.io/skills/earthtojake-dfam-check?utm_source=security_passport_badge)

شارة HTML

<a href="https://skillstore.io/skills/earthtojake-dfam-check?utm_source=security_passport_badge"><img src="https://skillstore.io/badges/skills/earthtojake-dfam-check/security.svg" alt="Skillstore security assessment" loading="lazy"></a>

بطاقة قابلة للتضمين

<iframe src="https://skillstore.io/embed/skills/earthtojake-dfam-check.html" title="Skillstore Security Assessment" sandbox="allow-popups allow-popups-to-escape-sandbox" loading="lazy" referrerpolicy="no-referrer" width="420" height="180"></iframe>

الاستشهادات الأكاديمية (APA · BibTeX · CFF)

اقتباس APA

earthtojake. (2026). dfam-check security audit report (audit version 1) [Author version unspecified]. Skillstore. https://skillstore.io/skills/earthtojake-dfam-check/audits/1

اقتباس BibTeX

@techreport{earthtojake-earthtojake-dfam-check-2026,
  author = {earthtojake},
  title = {dfam-check security audit report (audit version 1)},
  institution = {Skillstore},
  year = {2026},
  number = {1},
  url = {https://skillstore.io/skills/earthtojake-dfam-check/audits/1},
  note = {Author version unspecified}
}

CITATION.cff

cff-version: 1.2.0
message: "If you use this Skill, cite its author and this versioned security audit report."
title: "dfam-check security audit report (audit version 1)"
version: "unspecified"
type: report
authors:
  - name: "earthtojake"
date-released: "2026-09-08"
url: "https://skillstore.io/skills/earthtojake-dfam-check/audits/1"
identifiers:
  - type: other
    value: "skillstore:earthtojake-dfam-check:audit:1"
    description: "Skillstore immutable audit report identifier"

تقييم Skillstore

سبب هذا التقييم موثوقية الأدلة: متوسط

الهندسة المعمارية

قابلية الصيانة

المحتوى

المجتمع

الامتثال للمواصفات

ما الذي يمكنك بناؤه

Validate a prototype mesh

Check walls, overhangs, scale, and watertightness before sending a prototype to a print service.

Compare manufacturing processes

Evaluate one mesh against candidate process limits and identify which measurements need process-specific data.

Prepare a redesign review

Use measured failures and orientation tradeoffs to create concrete geometry changes before CAD regeneration.

جرّب هذه الموجّهات

Basic Printability Check

Check the attached mesh for printability. Ask for the target process if it is missing, then report the measured geometry facts and the main risks.

Process Comparison

Compare this mesh for FDM, SLS, SLA/DLP, metal PBF, and MJF. Use the process limits reference, separate measured results from missing checks, and explain the strongest constraints.

Orientation Recommendation

Measure the mesh with the target process angle, then evaluate candidate orientations. Recommend the best option using support area and build height, with the tradeoff stated clearly.

Redesign Handoff

Create a prioritized redesign brief from the measured DfAM failures. Include the evidence field, target dimensions or angles, uncertainty, and the re-measurement step after CAD regeneration.

أفضل الممارسات

Provide the target process, material, layer height, and machine datasheet when available.
Measure the exact uploaded mesh and cite both the measured field and the selected process limit.
Confirm units when the scale check reports a suspiciously small bounding-box diagonal.

تجنب

Do not infer printability from a render, generator script, or triangle count.
Do not silently rescale geometry or treat a sampled minimum as exhaustive proof.
Do not apply support-angle findings to powder processes or present support volume as slicer accuracy.

الأسئلة المتكررة

Which mesh formats are supported?

The workflow supports STL, OBJ, PLY, and 3MF mesh files. STEP and STP files should be exported to an STL sidecar first.

Does the skill run a slicer?

No. It measures geometry and reports comparisons. It does not slice, upload, start print jobs, or control a printer.

Which printing processes are covered?

The reference includes FDM or FFF, SLS, SLA or DLP, metal PBF, and MJF.

How reliable is wall thickness?

Wall thickness comes from ray-cast sampling. The sampled fifth percentile is a useful violation signal, but it is not an exhaustive inspection.

Can it recommend an orientation?

It compares six axis-aligned orientations by support area and build height. It does not search arbitrary rotations or replace slicer verification.

What does a need-more-information result mean?

It means the process context, geometry evidence, sampling quality, or a required measurement is missing. Provide more data before making a firm decision.